Mostrando las entradas con la etiqueta real estate opportunities. Mostrar todas las entradas
Mostrando las entradas con la etiqueta real estate opportunities. Mostrar todas las entradas

domingo, 30 de septiembre de 2018

Losas de cimentación lo más común en las casas modernas en Querétaro


Losas de cimentación lo más común en las casas modernas en Querétaro


La losa de cimentación es una placa hecha de hormigón que se apoya en un terreno en la cual se reparte el peso y las cargas de la construcción.
Las losas se definen por ser un tipo de cimentación superficial que tiene buen comportamiento en terrenos poco estables, que con otro tipo de cimentación podrían asentarse de manera diferencial.
Las que más se usan son las de espesor constante para la construcción de casas “pequeñas” y su cálculo se parece mucho a de las losas de azoteas sólo que se invierten las direcciones de los esfuerzos y las cargas axiales. Sus trabes también se invertirían para quedar enterradas y evitar obstáculos en superficie.



domingo, 23 de septiembre de 2018

Sugerencias de revisión por si compras un departamento.


Sugerencias de revisión por si compras un departamento.


 Revisa que las medidas correspondan a lo ofrecido pues deben de coincidir con las escrituras.
 Revisa que todas las puertas abran sin raspar con los marcos y piso, pues se calcula que deben de tener una holgura y si rozan revisar si es problema de la “puerta” o la construcción puede estar mal hecha.
Revisar también que las ventanas funcionen correctamente, si son corredizas que no se atasquen pues pudiera ser simplemente suciedad en el riel o en otro caso asentamiento de la obra, lo que se tendría que comentar con el vendedor para que sea reparado o se considere para hacer ajuste en el precio de venta.
En cuanto a la pintura es bueno verificar que los tonos por área sean iguales, pues de no ser así pudiera ser que hubo alaguna reparación y se tendría que revisar la zona más a fondo.
En cuanto a los closets checar que las puertas o correderas funcionen bien y que estén niveladas tanto en en su marco con respecto al piso y al techo es decir que su “cuadratura sea perfecta”.
En cuanto a la fachada que no se vea con reparaciones mayores y que se vea con mantenimiento normal.
Igual revisar que la reja y puerta peatonal se vean en buenas condiciones, si son eléctricas que funcionen bien.
En la obra en su exterior que no se vean fisuras “importantes” es normal encontrar  pequeñas grietas del aplanado pero si se ven reparaciones mayores ser cautelosos y solicitar el apoyo de algún arquitecto.
Revisar la caducidad de tanques de gas (cada tanque indica su fecha de elaboración) lo usual es cambiarlo cada 10 años, pero si están en muy buen estado lo máximo que duran son 20 años y se deberán de cambiar aunque se “vean muy bien” por fuera por seguridad de el propio dueño y de sus vecinos.
En cuanto a la cocina que funcionen bien las tomas de agua y gas sin fugas ni escurrimientos.

Checar todas las llaves de agua de baños y de área común que no tengan fugas o “humedad” en muros aledaños.
En cuanto a los pisos verificar que estén nivelados pues (se puede usar un nivel  y existen unos muy baratos) pues inclusive esto nos puede indicar si el edificio ha sufrido algún asentamiento preocupante por sismo o algún otro factor.
Revisar recubrimiento cerámico pues si se ve que algunas piezas no coinciden con las originales pudiera ser que sufrió alguna reparación mayor y debemos investigar la naturaleza de la misma.
REVISAR LO ANTERIOR AUNQUE SEA NUEVA LA CONSTRUCCIÓN.  .



viernes, 14 de septiembre de 2018

Tips for waterproofing a roof





Tips for waterproofing a roof 

Tip # 1 Ask your client about the use that the property will give you and what time of warranty requires This is the starting point to establish the range of materials suitable for what the client is looking for. It may be that the client is only in his position for a year because he has already moved and in that case it is a basic condition and not so durable. 

Tip # 2 Check if it is a new roof or if it already has a waterproof system In new slabs most systems can be installed without problem, but in those that occupy a re-waterproofing or maintenance must take special care that the new system is compatible with the existing, or failing to completely scrape the material current until you reach the concrete slab. 

Tip # 3 Check if the slab is flat or inclined Impervious emulsified systems are not suitable for a flat slab (either acrylic or asphalt) as the minimum ponding can re-emulsify the system. In these cases a prefabricated or polyurethane system is needed. 

Tip # 4 Ask your client if the roof will have sporadic or continuous pedestrian traffic This variable is very important to determine if it is necessary to use a simple or reinforced system, or to include the design and installation of traffic corridors. 

Tip # 5 Take into account the weather conditions of the place If you are going to work in a geographical area where cold weather or extreme heat predominates, you must use materials specially designed for these climatic conditions. 

Tip # 6 Make sure that the roof surface is completely clean before you start working It is very important that in any system that is going to be installed, the concrete surface is healthy, free of grease, dust, loose parts or bad adhesion; the cracks are repaired, as well as the penetrations and downpipes are reinforced with bands of waterproof material and polyester fabric. In cases where there are major cavities or puddles, it is necessary to make a paste. 

Tip # 7 Make sure you buy a good quality waterproofing from reliable manufacturers Each manufacturer performs laboratory tests to determine the life of their waterproof systems and based on these results the warranty period is established, and in turn based on this guarantee, future maintenance or renewals are calculated. It is important to mention that each manufacturer performs the same type of test to determine the guarantee of their product, but in what they differ is in the "safety mattress", that is, the ethical manufacturer carries out the test and if the results are stipulated that the material lasts outdoors for 5 years, manages a margin of safety, and instead of labeling with a 5 year warranty, it is labeled with 3 years. Manufacturers of low quality products and price do not use this margin and usually tag for 5 years. That is why it is important to look for and select waterproofing contractors that work with materials from ethical manufacturers. If you work with materials where the manufacturer did not use safety margin, it is very likely that maintenance or renewal of the waterproofing will be necessary well before the labeling warranty period. 
. Contacto

martes, 28 de agosto de 2018

Buying land in Mexico




Buying land in Mexico for industries.


It´s possible and safe to buy “ejido” land when you have legal assistance, however some investors have heard “stories” that is dangerous and that they will risk their money, but the solution to this is working with a realtor and a qualified attorney, so your investment will be safe.A lawyer prepared must know how the laws of session of rights of lands in an "ejido" works and this is also aware of the real estate agent, then the investor should be informed about the options that meet the requirements required for their industry or company, and of course you must be aware of your real estate agent and lawyer who must promptly inform the legal situation of the land that is about to buy. If everything is in order and clear for the three parties, it is most likely that the investor will get great opportunities both for him and for the business he is about to undertake.


Losas de cimentación lo más común en las casas modernas en Querétaro

Losas de cimentación lo más común en las casas modernas en Querétaro La losa de cimentación es una placa hecha de hormigón que se apoya...